Immutable zkEVM

Instructions to set up your Immutable zkEVM node.

Requirements

Prerequisites

  1. Install Docker
  2. (Optional) If you plan to use WireGuard (see Get access to the Immutable zkEVM partner nodes), install it.
sudo apt-get install wireguard

Instructions

Get access to the Immutable zkEVM partner nodes

The Immutable zkEVM blockchain has dedicated nodes that serve as access points for partners wanting to peer with the network. Immutable protects these nodes from bad actors trying to disrupt partner services by putting limits on who can establish a connection.

Partners can choose between a static IP allowlist or a WireGuard tunnel to establish their connections.

The static IP allowlist ensures only a predetermined list of approved IP addresses can establish connections.

The WireGuard tunnel provides partners with a secure and private conduit for their connections to the Immutable zkEVM, without requiring a static IP.

From your vald container, create a transaction with a note that includes a shasum hash of your static IP.

axelard tx bank send broadcaster [any-axelar-address] 1uaxl --note "$( echo axelar-static-ip-[static-ip] | shasum -a 256 - )"

Send an email to the Immutable team including your static IP and a link to your transaction in the Axelar explorer. For example:

Please add my static IP to the Immutable allowlist: _STATIC_IP_

See my verfication transaction at: _LINK_TO_EXPLORER_

The Immutable team will reply with a confirmation that your IP has been added to the allowlist.

Using the WireGuard CLI, create a private and public key for your client.

umask 077
wg genkey > wg-privatekey
wg pubkey < wg-privatekey > wg-publickey

Using the Axelar CLI, create a transaction with a note that includes a shasum hash of your public key.

axelard tx bank send broadcaster [any-axelar-address] 1uaxl --note "$( echo axelar-wireguard-[wireguard-pubkey] | shasum -a 256 - )"

Send an email to the Immutable team including your static IP and a link to your transaction in the Axelar explorer. For example:

Please add my public key to the Immutable WireGuard tunnel: _WIREGUARD_PUBLIC_KEY_

See my verfication transaction at: _LINK_TO_EXPLORER_

The Immutable team will reply with a configuration file for your WireGuard client. Once you receive this file, update the PrivateKey entry with the contents of your wg-privatekey file.

Save the WireGuard configuration file in /etc/wireguard/wg0.conf and use wg-quick to setup the tunnel.

wg-quick up wg0

The output should look something like this:

[#] ip link add wg0 type wireguard
[#] wg setconf wg0 /dev/fd/63
[#] ip -4 address add <ASSIGNED_CIDR> dev wg0
[#] ip link set mtu 8921 up dev wg0
[#] ip -4 route add <GATEWAY_CIDR> dev wg0
[#] ip -4 route add <GATEWAY_CIDR> dev wg0
[#] ip -4 route add <GATEWAY_CIDR> dev wg0

Setup the Immutable zkEVM node

  1. Create a data directory.
mkdir /opt/immutable-zkevm
  1. Pull the Docker image.
docker pull ghcr.io/immutable/go-ethereum/go-ethereum:v0.0.8
# Create a short-form tag we can reference in the next few commands
docker tag ghcr.io/immutable/go-ethereum/go-ethereum:v0.0.8 geth
  1. Initialise the node.
docker run \
  --rm \
  -v /opt/immutable-zkevm:/mnt/geth \
  --name geth \
  geth init \
  --datadir /mnt/geth /etc/geth/testnet.json 
docker run \
  --rm \
  -v /opt/immutable-zkevm:/mnt/geth \
  --name geth \
  geth init \
  --datadir /mnt/geth /etc/geth/mainnet.json 
  1. Start the Immutable zkEVM node as a service
docker run \
  -d \
  --restart=always \
  -v /opt/immutable-zkevm:/mnt/geth \
  --name geth \
  -p 8545:8545 \
  geth \
  --config /etc/geth/testnet.toml \
  --datadir /mnt/geth \
  --networkid 13473 \
  --http \
  --http.port "8545" \
  --http.addr "0.0.0.0"
docker run \
  -d \
  --restart=always \
  -v /opt/immutable-zkevm:/mnt/geth \
  --name geth \
  -p 8545:8545 \
  geth \
  --config /etc/geth/mainnet.toml \
  --datadir /mnt/geth \
  --networkid 13371 \
  --http \
  --http.port "8545" \
  --http.addr "0.0.0.0"

Verify your deployment

  1. Check the logs.
docker logs geth

The following logs indicate you are synching from the genesis block.

INFO [12-04|04:54:26.418] Maximum peer count                       ETH=100 LES=0 total=100
INFO [12-04|04:54:26.421] Smartcard socket not found, disabling    err="stat /run/pcscd/pcscd.comm: no such file or directory"
INFO [12-04|04:54:26.422] initialising New Relic agent... 
ERROR[12-04|04:54:26.422] Failed to initialise New Relic agent: NEW_RELIC_APP_NAME missing 
INFO [12-04|04:54:26.433] Enabling recording of key preimages since archive mode is used 
INFO [12-04|04:54:26.446] Using pebble as the backing database 
INFO [12-04|04:54:26.446] Allocated cache and file handles         database=/mnt/geth/geth/chaindata cache=512.00MiB handles=524,288
INFO [12-04|04:54:26.504] Opened ancient database                  database=/mnt/geth/geth/chaindata/ancient/chain readonly=true
INFO [12-04|04:54:26.505] State scheme set to already existing     scheme=hash
INFO [12-04|04:54:26.508] Set global gas cap                       cap=50,000,000
INFO [12-04|04:54:26.509] Initializing the KZG library             backend=gokzg
INFO [12-04|04:54:26.650] Allocated trie memory caches             clean=512.00MiB dirty=0.00B
INFO [12-04|04:54:26.650] Using pebble as the backing database 
INFO [12-04|04:54:26.650] Allocated cache and file handles         database=/mnt/geth/geth/chaindata               cache=512.00MiB handles=524,288
INFO [12-04|04:54:26.730] Opened ancient database                  database=/mnt/geth/geth/chaindata/ancient/chain readonly=false
INFO [12-04|04:54:26.753] Initialising Ethereum protocol           network=13473 dbversion=8
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.754] --------------------------------------------------------------------------------------------------------------------------------------------------------- 
INFO [12-04|04:54:26.754] Chain ID:  13473 (unknown) 
INFO [12-04|04:54:26.754] Reorg Invariants Enabled: true 
INFO [12-04|04:54:26.754] Consensus: Clique (proof-of-authority) 
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.754] Pre-Merge hard forks (block based): 
INFO [12-04|04:54:26.754]  - Homestead:                   #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/homestead.md) 
INFO [12-04|04:54:26.754]  - Tangerine Whistle (EIP 150): #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/tangerine-whistle.md) 
INFO [12-04|04:54:26.754]  - Spurious Dragon/1 (EIP 155): #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/spurious-dragon.md) 
INFO [12-04|04:54:26.754]  - Spurious Dragon/2 (EIP 158): #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/spurious-dragon.md) 
INFO [12-04|04:54:26.754]  - Byzantium:                   #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/byzantium.md) 
INFO [12-04|04:54:26.754]  - Constantinople:              #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/constantinople.md) 
INFO [12-04|04:54:26.754]  - Petersburg:                  #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/petersburg.md) 
INFO [12-04|04:54:26.754]  - Istanbul:                    #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/istanbul.md) 
INFO [12-04|04:54:26.754]  - Muir Glacier:                #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/muir-glacier.md) 
INFO [12-04|04:54:26.754]  - Berlin:                      #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/berlin.md) 
INFO [12-04|04:54:26.754]  - London:                      #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/london.md) 
INFO [12-04|04:54:26.754]  - Arrow Glacier:               #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/arrow-glacier.md) 
INFO [12-04|04:54:26.754]  - Gray Glacier:                #0        (https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/gray-glacier.md) 
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.754] The Merge is not yet available for this network! 
INFO [12-04|04:54:26.754]  - Hard-fork specification: https://github.com/ethereum/execution-specs/blob/master/network-upgrades/mainnet-upgrades/paris.md 
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.754] Post-Merge hard forks (timestamp based): 
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.754] --------------------------------------------------------------------------------------------------------------------------------------------------------- 
INFO [12-04|04:54:26.754]  
INFO [12-04|04:54:26.755] Loaded most recent local block           number=1,343,036 hash=b5bb3f..cbe4f1 td=2,686,073 age=1m17s
WARN [12-04|04:54:26.893] Sanitizing invalid blobpool storage cap  provided=0 updated=10,737,418,240
INFO [12-04|04:54:26.893] Initialized transaction indexer          limit=2,350,000
INFO [12-04|04:54:26.929] Gasprice oracle is ignoring threshold set threshold=2
INFO [12-04|04:54:26.935] Shutdown tracker started marker 
WARN [12-04|04:54:26.935] Engine API enabled                       protocol=eth
WARN [12-04|04:54:26.935] Engine API started but chain not configured for merge yet 
INFO [12-04|04:54:26.935] Starting peer-to-peer node               instance=Geth/v1.13.0-unstable-cb37d5a3-20231204/linux-amd64/go1.21.4
INFO [12-04|04:54:26.975] IPC endpoint opened                      url=/mnt/geth/geth.ipc
INFO [12-04|04:54:26.975] Loaded JWT secret file                   path=/mnt/geth/geth/jwtsecret crc32=0xaa03f756
time="2023-12-04T04:54:26Z" level=error msg="Failed to initialise New Relic middlware: nrApp is nil"
time="2023-12-04T04:54:26Z" level=error msg="Failed to initialise New Relic middlware: nrApp is nil"
INFO [12-04|04:54:26.976] WebSocket enabled                        url=ws://127.0.0.1:8551
INFO [12-04|04:54:26.976] HTTP server started                      endpoint=127.0.0.1:8551 auth=true prefix= cors=localhost vhosts=localhost
INFO [12-04|04:54:26.981] New local node record                    seq=1,701,654,445,241 id=660d517490a62260 ip=127.0.0.1 udp=0 tcp=0
INFO [12-04|04:54:26.981] Started P2P networking                   self=enode://9040706fed7d4ac85ff44ac1ad54b28ec39b585ec23a5dacb920163d95dd576ca0ab8d2ba4b590a16a183bc14114ac299f2712ada37f8060be684983b1d5016f@127.0.0.1:0
INFO [12-04|04:54:36.978] Block synchronisation started 
INFO [12-04|04:54:37.205] Imported new chain segment               number=1,343,079 hash=560a17..971f02 blocks=43 txs=0 mgas=0.000 elapsed=205.607ms mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:37.518] Imported new chain segment               number=1,343,080 hash=db30ec..114a94 blocks=1  txs=0 mgas=0.000 elapsed=4.535ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:39.517] Imported new chain segment               number=1,343,081 hash=b72134..f35f55 blocks=1  txs=0 mgas=0.000 elapsed=4.587ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:41.015] Imported new chain segment               number=1,343,082 hash=882e89..2b8def blocks=1  txs=0 mgas=0.000 elapsed=5.473ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:43.012] Imported new chain segment               number=1,343,083 hash=39f454..608c0c blocks=1  txs=0 mgas=0.000 elapsed=4.066ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:45.518] Imported new chain segment               number=1,343,084 hash=aa9eb2..f83f8f blocks=1  txs=0 mgas=0.000 elapsed=4.481ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:47.517] Imported new chain segment               number=1,343,085 hash=8161fb..9142ec blocks=1  txs=0 mgas=0.000 elapsed=3.971ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:49.516] Imported new chain segment               number=1,343,086 hash=fd6e70..0bf228 blocks=1  txs=0 mgas=0.000 elapsed=4.095ms   mgasps=0.000 triedirty=0.00B
INFO [12-04|04:54:51.011] Imported new chain segment               number=1,343,087 hash=9bf651..57e23e blocks=1  txs=0 mgas=0.000 elapsed=5.172ms   mgasps=0.000 triedirty=0.00B
...
  1. Check the chain ID.

From the container host.

curl http://localhost:8545 \
  -X POST \
  -H "Content-Type: application/json" \
  --data '{"method":"eth_chainId","params":[],"id":1,"jsonrpc":"2.0"}'

Compare it to the output reported by Immutable nodes.

curl https://rpc.testnet.immutable.com \
  -X POST \
  -H "Content-Type: application/json" \
  --data '{"method":"eth_chainId","params":[],"id":1,"jsonrpc":"2.0"}'

The output should be:

{"jsonrpc":"2.0","id":1,"result":"0x34a1"}
curl https://rpc.immutable.com \
  -X POST \
  -H "Content-Type: application/json" \
  --data '{"method":"eth_chainId","params":[],"id":1,"jsonrpc":"2.0"}'

The output should be:

{"jsonrpc":"2.0","id":1,"result":"0x343b"}

Understanding the Docker command

The following is a breakdown of the docker command used to start up the Immutable zkEVM node. This information should help node operators adjust the command to their respected environments.

For simplicity, we use the Mainnet start up command, but the information applies to both Testnet and Mainnet.

docker run \
  -d \
  --restart=always \
  -v /opt/immutable-zkevm:/mnt/geth \
  --name geth \
  -p 8545:8545 \
  geth \
  --config /etc/geth/mainnet.toml \
  --datadir /mnt/geth \
  --keystore /mnt/geth/keystore \
  --networkid 13371 \
  --http \
  --http.port "8545" \
  --http.addr "0.0.0.0"
  • -d Detach. This means the container will start without holding on to your terminal.
  • --restart=always: Always keep it running. This tells the Docker daemon, if the container stops running (e.g., if the host restarts), start it up again.
  • -v <LOCAL_DIR>:<CONTAINER_DIR>: Mount host directory. This tells docker to map a directory from your host, to a directory inside the container.
  • --name geth: Name the container. This helps us reference the container later in the docker CLI. If you run docker ps you should see the container with an ID and this name.
  • -p <HOST_PORT>:<CONTAINER_PORT>. Map host port. This tells docker to forward any connections on the host’s <HOST_PORT> to the container’s <CONTAINER_PORT>.
  • geth: Command line. Here starts the command line inside the container. This is the binary for the immutable-geth instance running inside the container.
  • --config /etc/geth/mainnet.toml: Pre-baked mainnet configuration. This path MUST NOT BE MODIFIED.
  • --datadir <CONTAINER_DIR>: Directory path. This is the directory geth will use for storage. It MUST match <CONTAINER_DIR> in the -v flag. It MUST match the path used in the initialisation commands ran previously.
  • --keystore <CONTAINER_DIR>/keystore: Keystore path. This is relative to <CONTAINER_DIR> mentioned above. NOTE: we have a backlog task to potentially remove this.
  • --networkid 13371: ChainID. This MUST NOT be modified.
  • --http: Enable RPC interface.
  • --http.port <CONTAINER_PORT>: Expose RPC interface in container port <CONTAINER_PORT>. This MUST match <CONTAINER_PORT> in the -p flag above.
  • --http.addr "0.0.0.0". Expose the RPC interface in all network addresses.

Configure vald

In order for vald to connect to your Immutable zkEVM node, your rpc_addr should be exposed in vald’s config.toml

[[axelar_bridge_evm]]
name = "immutable"
rpc_addr = "http://IP:PORT"
start-with-bridge = true
[[axelar_bridge_evm]]
name = "immutable"
rpc_addr = "http://IP:PORT"
start-with-bridge = true
Edit this page